Africa Galvanized Iron Wire Welded Roll Mesh Welding Machine
Roll Mesh Welding Machine Description
This machine is roll mesh welding machine.Usually, the diameter of this kind of roll mesh is relatively thin.The mesh size can be 1/2",1",1/4",etc.The mesh size of the machine is not adjusted casually, but it can be adjusted in multiple ways.The welding of the machine is controlled by its cabinet.Workers only need to press the button,the machine will weld automatically.There are counter in the cabinet,workers need to set the length of the mesh in advance.When the machine reaches the length,the machine will stop automatically.The worker can cut off the mesh with electric cutter,tied it and unload it.
Roll Mesh Welding Machine Technology
The welding machine belongs to resistance welding.There are integrated circuit board to control thyristor,then the thyristor can control the welding current of the machine.Different wire diameter can use different welding current to reach best welding effect.The welding speed of the machine can be adjusted according to the order quantity, and the welding speed can be fast or slow.The burr on both sides can be trimmed while welding,so the two sides of the mesh are neat and beautiful.
Roll Mesh Welding Machine Advantage
1. The upper and lower electrodes are made of high chromium copper.This material is in good conductivity,wear resistance and long service life.
2. The whole frame is made of steel plate by laser cutting. Accurate size, no heat distortion.
3. The warp wire and weft wire feeding are in wire coils.This greatly reduces the amount of labor of workers.
4. Welding is fully automatic. After one time welding, all the solder joints on the weft are welded
Roll Mesh Welding Machine
Control Cabinet:This is the heart of the machine.It can control the welding current and speed of the machine.
Counter:This can calculate the length of the mesh.Once the welding machine reaches the length preset,the machine will stop automatically.
Welding Transformer: It is made of pure copper. The welding current can be adjusted by current gear.
Loading of the machine
Finished Mesh
Product Tags:
|
|
0.5mm Galvanized Iron Welded Wire Mesh Machine Images
|
